Other operating notes of ultrasonic vibrating sieving machine - Jiayuanda Technology

1. The working input voltage of ultrasonic resonant power supply is 220V AC. The ultrasonic power output is led out from the junction box on the rear panel of the chassis. Brown (red) color is " plus " pole, blue (black) color is "-" pole. When wiring, be sure to pay attention to voltage polarity, do not connect the wrong line.

2. When there is no load on the grid, that is, when there is no tension on the grid, do not turn on the ultrasonic power supply. Otherwise, it is easy to cause power overcurrent and damage to the grid and oscillator.

3. Under normal circumstances, if there is no fault of the oscillator, generally do not remove it from the grid. The aviation plug of the oscillator has been tightened with sealant, do not remove it under normal circumstances.Before starting the machine, check whether the nut of the oscillator and the connector plug is tight, and whether the oscillator and the network frame are tight. In the process of use, pay attention to the protection of the connection line between the chassis and the oscillator, the connection line and the oscillator socket should pay attention to moisture-proof, the connection plug and socket are not allowed to water.

4. Each set of ultrasonic includes a resonant power supply, an oscillator and a network frame. Three please number matching use effect is better, do not confuse with other ultrasonic.